AIRBLAST
The Art of Powerful
Cleaning...
For All Your
Blasting and Painting Supplies
PIPE COATING EQUIPMENT
The
Airblast Pipecoater-I,
II and III
are designed to coat the inside of pipes and tubes quickly
and evenly
without the need to rotate the item. Both machines comfortably handle most
long life
heavy duty protective paint coating systems. Either unit simply
couples to a suitable
airless paint spray machine of minimum 45:1 ratio.
In operation a rotating head, powered by an airmotor throws paint by
centrifugal force at an
evenly metered flow against the surface. Pipecoater
is manually pulled through the pipe
at a pre-determined
speed based on
paint
film thickness and
type of coating.
Pipecoater-I for internal diameter sizes from 4" to 7" (90 - 180 mm).
Pipecoater-II for internal diameter sizes from 7" to 38" (180 - 950 mm).
Pipecoater-III
is an economy model for pipes
in the range 3" to 35" (75 - 900 mm).
Downloads
Airblast Catalogue - Section 7
Operation Manual - Pipecoater I and II
Operation Manual - Pipecoater III
Technical Info - Conversion Pipecoaters
Airblast B.V. - P.O Box 1075 - 1700 BB Heerhugowaard - The Netherlands - Tel.: +31-72-5718002 - Fax: +31-72-5714340 - E-mail: info@airblast.com
This site is best viewed in 1024 x 768 pixels.
Send mail to
webmaster@airblast.com
with questions or comments about this web site.
Copyright © 2004 Airblast B.V. - The Netherlands